not applicable
Items 1 - 30 of 66
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
DaVolcano Nozzle for 3D printer, type - DaVolcano, nozzle type - Direct, nozzle length - 21mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 16mm
Top
MK7 nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
Nozzle for 3D printer, type - Ultimaker Original, material - stainless steel X 8 CrNiS 18-9, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 15.8mm, keyway width - 10mm, nozzle thread - M6, nozzle thread length - 5.8mm
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
Nozzle for 3D printer, type - AiO, material - brass CuZn37, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 35.6mm, key width - 8mm, nozzle thread - M6/M6, nozzle thread length - 15mm
In stock
- Outer diameter 9 mm
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
- Length 52 mm
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
In stock
Material: Coated brass - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
MK7 Teflon Nozzle for 3D printer, type - MK7, coating - anti-adhesive, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
MK8 Teflon Nozzle made of brass CuZn37 for 1.75mm filament nozzle for 3D printer, type - MK8, coating - non-stick, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
Material: Copper coated - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
Nozzle for Ideaformer IR3 3D printer, type - IR3, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 15mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 7mm
Items 1 - 30 of 66