BeschreibungThe nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium.change also the diameter. We have nozzles with a diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course, depending on the type of nozzle.
One of the most popular Nozzle designs is the V6. It is very popular and can be used with various hotends in many printers. Unlike the other designs, the tip of the nozzle is very close to the heating block, which means that the heat in the filament is kept optimal until the actual printing.
The premium nozzles from Advanc3D are a series of high quality replacement nozzles that give you a noticeable difference when printing. A high quality nozzle is like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below Â± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Type : VX
Material: Copper coated
Filament diameter: 0.4mm
Filament diameter: 1.75mm
Nozzle type: Direct
Lens length: 12.6mm
Flare width: 7mm
Lens thread: M6
Tube thread length: 7.6mm
Suitability: Not suitable for abrasive materials.
Feature: Compatible with all V5/V6 Hotends
Others also bought:
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
2,00 € *
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
1,00 € *
Nozzle for 3D printer, type - MK8, material - C15, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 7mm, nozzle thread - M6, nozzle thread length - 4mm
4,00 € *
Dimensions: 220x220, 300x300 or 400x400 depending on the variation - Material: aluminum, insulation material - Thickness: approx. 1cm - Adhesive foil on the back side.
13,00 € *
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
3,00 € *