Description
The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium.change also the diameter. We have nozzles with a diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course, depending on the type of nozzle.
This nozzle combines a normal nozzle with the corresponding throat. The upper part with the M6 thread is simply turned into your V6 Hotend and at the lower part you can, depending on your mood, turn on any heating block. Because the nozzle is locked against the cold end and the heating block is only loosely screwed on, the assembly is very simple and there can be no leaks between nozzle and throat. We found this product during one of our last trips and found it interesting enough to offer it to you.
Advanc3D premium nozzles are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A high quality nozzle is like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Features:
Type : AiO
Material: Brass CuZn37
Filament diameter: 0.4mm
Filament diameter: 1.75mm
Nozzle type: Bowden
Tube length: 35.6mm
Flare width: 8mm
Lens thread: M6/M6
Cannelure thread length: 15mm
Suitability: Not suitable for abrasive materials
Feature: Compatible with all V5/V6 Hotends
This nozzle combines a normal nozzle with the corresponding throat. The upper part with the M6 thread is simply turned into your V6 Hotend and at the lower part you can, depending on your mood, turn on any heating block. Because the nozzle is locked against the cold end and the heating block is only loosely screwed on, the assembly is very simple and there can be no leaks between nozzle and throat. We found this product during one of our last trips and found it interesting enough to offer it to you.
Advanc3D premium nozzles are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A high quality nozzle is like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Features:
Type : AiO
Material: Brass CuZn37
Filament diameter: 0.4mm
Filament diameter: 1.75mm
Nozzle type: Bowden
Tube length: 35.6mm
Flare width: 8mm
Lens thread: M6/M6
Cannelure thread length: 15mm
Suitability: Not suitable for abrasive materials
Feature: Compatible with all V5/V6 Hotends
Reviews
There are no reviews yet.
