Advanc3D
Items 1 - 50 of 212
Best sellers
This 20cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 150cm long cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
This 100cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
Best sellers
Material: Aluminum, Length: 25mm, Outer diameter: 18mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Best sellers
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, graphite inserts, self-lubricating, replacement for LM8UU, maintenance-free
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
This silicone dampener for the heating bed of 3D printers increases the stability, making bed leveling hardly necessary.
In stock
- 24V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Single row ball bearings with deep raceway grooves - Narrow osculation between raceway grooves and balls - Radial and axial loads in both directions, even at high speeds
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 45 mm, flange: 25 x 25 mm, silent running, LMK8LUU
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
DaVolcano Nozzle for 3D printer, type - DaVolcano, nozzle type - Direct, nozzle length - 21mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 16mm
In stock
Inner diameter 10 mm, outer diameter 19 mm, length 55 mm, flange: 30 x 30 mm, quiet running, LMK10LUU
Top
MK7 nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
with compact handle with wear-resistant steel blade guide and blade magazine in the hollow handle,
- for blades with the code number "E" (shank-Ã 3,2 mm),
- for all tools with crank drive,
- for blades with the code number "E" (shank-Ã 3,2 mm),
- for all tools with crank drive,
In stock
Backlash-free T8 trapezoidal thread nut for use in DIY CNC milling machines, 3D printers and laser engravers. High manufacturing accuracy and optimal fit. This nut has a pitch of 8mm and can only be used aut T8 spindles with 2mm pitch.
Features:
- Thread T 8x8 right
- Diameter 10mm
- Flange diameter 22mm
- Bolt circle 16mm
- length 50mm
- Flange thickness 2mm
- Material CuSn8P
In stock
- 16 or 20 teeth (16T 20T) - inner diameter 5mm or 8mm - outer diameter 13mm, 16mm or 18mm - belt width 6mm or 10mm for double pulley
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
In stock
Thread T 8x8 right
- diameter 10mm
- flange diameter 22mm
- Bolt circle 16mm
- length 15mm
- Flange thickness 2mm
- Material CuSn8P
- diameter 10mm
- flange diameter 22mm
- Bolt circle 16mm
- length 15mm
- Flange thickness 2mm
- Material CuSn8P
In stock
Vibration dampers for Nema17 stepper motors. Two steel mounts with vibration damping rubber layer. Virtually torsion free with no loss of damping. Torsionally stiff
In stock
Nozzle for 3D printer, type - Ultimaker Original, material - stainless steel X 8 CrNiS 18-9, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 15.8mm, keyway width - 10mm, nozzle thread - M6, nozzle thread length - 5.8mm
In stock
DaFlexpad system consisting of Flexpad and magnetic foil with peel-off tab. Magnetic foil easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for
Top rated
- Ideal for ABS, PLA, HIPS, PETG, Brick, Wood & Flexible
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 220x220 mm
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 220x220 mm
In stock
The Advanc3D Filament Pliers is an essential tool for any 3D printing enthusiast. It offers excellent precision and comfort to help you handle your 3D printing material.
In stock
M3 knurled nut for easy mounting and leveling of heating beds and printing plates. Suitable for Ultimaker Original, Ultimaker 2, Ultimaker 2+ and the corresponding Extended versions. Height: 12mm, head diameter: 15mm
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
In stock
C20
3.2mm
HSS
10 pcs
3.2mm
HSS
10 pcs
In stock
Height: 6mm - Hole: 5mm - Adjustment width: 0.1-0.5mm - Material: Stainless steel
Items 1 - 50 of 212