Advanc3D
Items 31 - 60 of 219
In stock
This sturdy corner angle made of steel connects three aluminum profiles at the same time at a right angle to each other. The aluminum profiles should have a cross-section of 20 mm x 20 mm and a groove opening of 6 mm.
In stock
High-quality processed cold-supply socket offers best hold for cold-supply plugs
In stock
Linear ball bearings or linear bearings for short, colloquially also called ball bushings or ball bushings, are special ball bearings with an unusual, because axial (instead of radial) ball circulation.
In stock
Inner diameter 10 mm, outer diameter 19 mm, length 55 mm, flange: 30 x 30 mm, quiet running, LMK10LUU
In stock
Inner diameter 12 mm, outer diameter 21 mm, length 57 mm, flange: 32 x 32 mm, quiet running, LMK12LUU
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 45 mm, flange: 25 x 25 mm, silent running, LMK8LUU
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, quiet running, LM8UU
In stock
RepRap compatible limit switch with connection cable. Perfectly suited as door contact, limit or reference switch for robots, 3D printers or CNC / self-build machines.
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
In stock
Current: 5A
Voltage: 250V
Voltage: 250V
In stock
Inner diameter 8 mm, outer diameter 16/18 mm, length 5 mm, flange thickness 1mm, smooth running bearing
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 38 teeth. Extruder drive gear with 38 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
These optical limit switches are RepRap compatible and use a 0.5mm beam, a little narrower than the 0.8mm HB102 beams. They have the standard 24mm mounting holes. The connection cables are about 50cm long and have 3-pin female connectors.
In stock
This forked photoelectric switch is perfect as a limit switch or reference switch for 3D printers, self-build mills or CNC machines and other projects.
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
This silicone dampener for the heating bed of 3D printers increases the stability, making bed leveling hardly necessary.
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Silk effect (velvet look)
minimal shrinkage
little warpage
Good diameter & roundness tolerances
No unpleasant odors
Easy to print
Tighter & less brittle than conventional PLA filament
minimal shrinkage
little warpage
Good diameter & roundness tolerances
No unpleasant odors
Easy to print
Tighter & less brittle than conventional PLA filament
In stock
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 3mm axles or M3 screws. Features:
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
Material: Aluminum, Length: 25mm, Outer diameter: 14mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
Items 31 - 60 of 219