Spare Parts
Items 101 - 150 of 245
In stock
The PEY / PEI magnetic spring steel pressure plate is compatible with your BambuLab P1P or X1 Carbon in the size 257x257mm
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Inner diameter 8 mm, outer diameter 16/18 mm, length 5 mm, flange thickness 1mm, smooth running bearing
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, quiet running, LM8UU
In stock
MK7 Teflon Nozzle for 3D printer, type - MK7, coating - anti-adhesive, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
MK8 Teflon Nozzle made of brass CuZn37 for 1.75mm filament nozzle for 3D printer, type - MK8, coating - non-stick, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
This 500cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
In stock
Material: Copper coated - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
Material aluminum black anodized, 65 x 65 x 3 mm (without rollers), suitable for 20 x 20 V-Slot profiles, with 2 eccentric nuts for adjustment, weight 71g
In stock
Plastic carriage for X axis for Makerbot, CTC or Flashforge printers.
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
This steel sliding block is designed for aluminum profiles with a groove opening of 6 mm.
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
DaFlexpad system consisting of magnetic Flexpad and a steel sheet that is glued to the heating bed. Magnetic sheet easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for.
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
The PED / PEI magnetic spring steel pressure plate is compatible with your BambuLab P1P or X1 Carbon in the size 257x257mm
In stock
The PEO / PEI magnetic spring steel printing plate is compatible with your 3D printer in the size 241x254mm
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
Nozzle for Ideaformer IR3 3D printer, type - IR3, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 15mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 7mm
In stock
Die and heating block for 1.75mm filament. The diameter is 0.4 mm.
In stock
Material: Stainless steel 1.4301 / 1.4305 - />Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M4
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Chromium nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
- CR-8 hot end heater block, compatible with Creality printers, easy to use, many nozzle compatible
In stock
Throat Neck Screw CR10 Titanium Copper Neck Screw Throat M6*27.5mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer ensures optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and the thermal conductivity is not optimally matched to your printing process.
In stock
Dualdrive Bowdenextruder - ABS - Black - suitable for 1,75 mm filament - suitable for Wanhao D9, Creality C R-10, Ender-3, Anet E10
Top
- compact design
- low weight
- solid construction
- improved filament guide for flexible filament
- Mountable with a standard hole pattern to be compatible for many models.
- Optimized for flexible filaments
- low weight
- solid construction
- improved filament guide for flexible filament
- Mountable with a standard hole pattern to be compatible for many models.
- Optimized for flexible filaments
In stock
- Ideal for ABS, PLA, HIPS, PETG, Brick, Wood & Flexible
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 235x235 mm with imprinted grid
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 235x235 mm with imprinted grid
In stock
- Filament diameter 1.75 mm.
- Made of hardened steel.
- Suitable for thing:3016298.
- Suitable for Prusa i3 MK3
- Made of hardened steel.
- Suitable for thing:3016298.
- Suitable for Prusa i3 MK3
In stock
The PEO / PEI magnetic spring steel printing plate is compatible with your 3D printer in the size 230x257mm
The PEO / PEI magnetic spring steel printing plate is compatible with your 3D printer in the size 310x310mm
In stock
The PET / PEI magnetic spring steel pressure plate is compatible with your BambuLab A1 mini in the size 184x184mm
In stock
- Prevents frequent leveling of the 3D printer. Very high stiffness!
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
In stock
Hexagon socket head cap screws to DIN 912
In stock
The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones.
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
In stock
These optical limit switches are RepRap compatible and use a 0.5mm beam, a little narrower than the 0.8mm HB102 beams. They have the standard 24mm mounting holes. The connection cables are about 50cm long and have 3-pin female connectors.
In stock
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 5mm axles or M5 screws.
Items 101 - 150 of 245