No
Items 41 - 80 of 213
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
In stock
Current: 5A
Voltage: 250V
Voltage: 250V
In stock
Inner diameter 8 mm, outer diameter 16/18 mm, length 5 mm, flange thickness 1mm, smooth running bearing
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 38 teeth. Extruder drive gear with 38 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
These optical limit switches are RepRap compatible and use a 0.5mm beam, a little narrower than the 0.8mm HB102 beams. They have the standard 24mm mounting holes. The connection cables are about 50cm long and have 3-pin female connectors.
In stock
This forked photoelectric switch is perfect as a limit switch or reference switch for 3D printers, self-build mills or CNC machines and other projects.
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
This silicone dampener for the heating bed of 3D printers increases the stability, making bed leveling hardly necessary.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 3mm axles or M3 screws. Features:
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
Material: Aluminum, Length: 25mm, Outer diameter: 14mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
Threaded nut as spare part for Creality CR-10/CR-10S/CR-10S Pro 3D printer.
In stock
Thread T 8x8 right
- diameter 10mm
- flange diameter 22mm
- Bolt circle 16mm
- length 15mm
- Flange thickness 2mm
- Material CuSn8P
- diameter 10mm
- flange diameter 22mm
- Bolt circle 16mm
- length 15mm
- Flange thickness 2mm
- Material CuSn8P
In stock
Backlash-free T8 trapezoidal thread nut for use in DIY CNC milling machines, 3D printers and laser engravers. High manufacturing accuracy and optimal fit. This nut has a pitch of 8mm and can only be used aut T8 spindles with 2mm pitch.
Features:
- Thread T 8x8 right
- Diameter 10mm
- Flange diameter 22mm
- Bolt circle 16mm
- length 50mm
- Flange thickness 2mm
- Material CuSn8P
In stock
Trapezoidal thread nut TR 8 8mm pitch Backlash-free bolt circle for Creality threaded nut as a spare part for Creality CR-10/CR-10S/CR-10S Pro 3D printer.
In stock
Advanc3D Ultimaker 2 Heat Sink (UM2 Aluminum Heat Sink -351707)
In stock
Advanc3D Heat Sink UM2 Mounting Bracket for Ultimaker 2
In stock
Advanc3D Cooler UM2 Mounting Bracket for Ultimaker 2
In stock
Including heating block and nozzle, thermistor NTC 3900k and 50V 12V heating cartridge thread M6, nozzle diameter 0.4 mm, filament suitability 1.75 mm
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6 M7*22mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer ensures optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6*21mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and the thermal conductivity is not optimally matched to your printing process.
In stock
Timing belt clamp for GT2 belts up to 9mm width
In stock
Discover our fantastic heated bed clamps â the perfect addition to your 3D printer accessories! These little helpers will keep your print bed safe and stable while your masterpiece comes to life.
In stock
Nozzle for 3D printer, type - AiO, material - brass CuZn37, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 35.6mm, key width - 8mm, nozzle thread - M6/M6, nozzle thread length - 15mm
In stock
Chromium nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
DaVolcano Nozzle for 3D printer, type - DaVolcano, nozzle type - Direct, nozzle length - 21mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 16mm
In stock
Nozzle for 3D printer, type - Ultimaker 2+, material - steel, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, nozzle diameter - 7mm, nozzle thread - M6, nozzle thread length - 5mm
Items 41 - 80 of 213