Advanc3D
Items 91 - 120 of 213
In stock
Silicone damper for heating bed - Height: 18 mm
This silicone damper for the heating bed of 3D printers increases stability, making bed leveling hardly necessary.
The existing springs are simply replaced by the silicone buffers.
Scope of delivery:
3 x silicone buffers 18mm length
1 x silicone buffer 16mm length
In stock
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Inner diameter 8 mm, outer diameter 16/18 mm, length 5 mm, flange thickness 1mm, smooth running bearing
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, quiet running, LM8UU
In stock
MK7 Teflon Nozzle for 3D printer, type - MK7, coating - anti-adhesive, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
MK8 Teflon Nozzle made of brass CuZn37 for 1.75mm filament nozzle for 3D printer, type - MK8, coating - non-stick, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
This 500cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
In stock
Material: Copper coated - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
Material aluminum black anodized, 65 x 65 x 3 mm (without rollers), suitable for 20 x 20 V-Slot profiles, with 2 eccentric nuts for adjustment, weight 71g
In stock
Plastic carriage for X axis for Makerbot, CTC or Flashforge printers.
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
This steel sliding block is designed for aluminum profiles with a groove opening of 6 mm.
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
DaFlexpad system consisting of magnetic Flexpad and a steel sheet that is glued to the heating bed. Magnetic sheet easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for.
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
Nozzle for Ideaformer IR3 3D printer, type - IR3, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 15mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 7mm
In stock
Die and heating block for 1.75mm filament. The diameter is 0.4 mm.
In stock
Material: Stainless steel 1.4301 / 1.4305 - />Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M4
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
Items 91 - 120 of 213