Advanc3D
Items 51 - 100 of 204
In stock
C20
3.2mm
HSS
10 pcs
3.2mm
HSS
10 pcs
In stock
The Advanc3D ESD-10 tweezers are an indispensable tool for every 3D printing enthusiast. It offers precise handling and additional electrostatic discharge (ESD) protection.
In stock
The Advanc3D ESD-15 tweezers with their 45° bent tip is a must-have for every 3D printing enthusiast. It combines precise handling with effective electrostatic discharge (ESD) protection.
In stock
The Advanc3D Extruder Block is specifically designed for the Makerbot Single Extruder MK8 Half Size CTC and offers outstanding performance and precise fit for your 3D printing system.
In stock
Extruder suitable for Ultimaker 2, 50 x 47 mm, mounting screws distance 26mm, Feeder wheel included, suitable for 1.75mm filament, left side
In stock
Height: 84 mm, width: 56 mm, depth: 58 mm, galvanized steel, holes and bushings already present
In stock
The Advanc3D extruder single block is specifically designed for use with A8 or similar i3 direct extruders and offers outstanding performance and compatibility.
In stock
Height: 6mm - Hole: 5mm - Adjustment width: 0.1-0.5mm - Material: Stainless steel
In stock
Feeder wheel for 1.75-3mm filament suitable for Ultimaker for feeding 1.75 mm and 3 mm filament in 3D printers.
In stock
This module allows you to automatically pause the 3D print job if the filament breaks or runs out. This allows you to insert new filament and resume the print job.
In stock
The Advanc3D Filament Pliers is an essential tool for any 3D printing enthusiast. It offers excellent precision and comfort to help you handle your 3D printing material.
In stock
Ribbon cable : AWG28 RM1,27 8pin - Post sockets: 8pin, RM2,54 - Length : 60cm
Best sellers
Material: Aluminum, Length: 25mm, Outer diameter: 18mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
In stock
with compact handle with wear-resistant steel blade guide and blade magazine in the hollow handle,
- for blades with the code number "E" (shank-Ã 3,2 mm),
- for all tools with crank drive,
- for blades with the code number "E" (shank-Ã 3,2 mm),
- for all tools with crank drive,
In stock
- Prevents frequent leveling of the 3D printer. Very high stiffness!
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Dimensions: 220x220, 300x300 or 400x400 depending on the variation - Material: aluminum, insulation material - Thickness: approx. 1cm - Adhesive foil on the back side.
In stock
M3 knurled nut for easy mounting and leveling of heating beds and printing plates. Suitable for Ultimaker Original, Ultimaker 2, Ultimaker 2+ and the corresponding Extended versions. Height: 12mm, head diameter: 15mm
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
This VolcanoV2 heater block allows you to use the high temperature PT100 sensors with high accuracy on your Volcano, making it compatible with the PT100 upgrade kit on your V6 hot end.
In stock
Heating block for Makerbot extruder suitable for copper insert
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
This sturdy corner angle made of steel connects three aluminum profiles at the same time at a right angle to each other. The aluminum profiles should have a cross-section of 20 mm x 20 mm and a groove opening of 6 mm.
In stock
High-quality processed cold-supply socket offers best hold for cold-supply plugs
In stock
The Advanc3D TR8 bearing block is specifically designed for use with the CR-10, CR-10s and Ender 3 models. With its built-in ball bearing, it ensures smooth movement and high precision in your 3D printing process.
In stock
Linear ball bearings or linear bearings for short, colloquially also called ball bushings or ball bushings, are special ball bearings with an unusual, because axial (instead of radial) ball circulation.
In stock
Inner diameter 10 mm, outer diameter 19 mm, length 55 mm, flange: 30 x 30 mm, quiet running, LMK10LUU
In stock
Inner diameter 12 mm, outer diameter 21 mm, length 57 mm, flange: 32 x 32 mm, quiet running, LMK12LUU
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 45 mm, flange: 25 x 25 mm, silent running, LMK8LUU
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, quiet running, LM8UU
Top rated
Inner diameter 6 mm, outer diameter 12 mm, length 30 mm, quiet running, LM6LUU
In stock
The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones.
In stock
RepRap compatible limit switch with connection cable. Perfectly suited as door contact, limit or reference switch for robots, 3D printers or CNC / self-build machines.
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
In stock
Current: 5A
Voltage: 250V
Voltage: 250V
In stock
Inner diameter 8 mm, outer diameter 16/18 mm, length 5 mm, flange thickness 1mm, smooth running bearing
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
In stock
- Ball bearing mounted arm
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 38 teeth. Extruder drive gear with 38 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
Top
MK7 nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
Items 51 - 100 of 204