Description
The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium.change also the diameter. We have nozzles with a diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course, depending on the type of nozzle.
The MK8 Nozzle is considered the successor of the MK7 and tries to make up for the disadvantage of the MK7 with more material. The more solid construction, based on the first Ultimaker nozzles, creates a heat cushion in the nozzle, so to speak, that the print material does not cool down too early. As with most nozzles, it is a matter of faith which design suits you better.
Advanc3D premium nozzles are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A high quality nozzle is like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Features:
Type : MK8
Material: Brass CuZn37
Filament diameter: 0.3mm
Filament diameter: 1.75mm
Nozzle type: Direct
Tube length: 13mm
Flare width: 8mm
Lens thread: M6
Cannelure thread length: 4.9mm
Suitability: Not suitable for abrasive materials
Feature: High accuracy
Compatible with:
- MakerBot
- Replicator 1
- MakerBot Replicator 2
- MakerBot Replicator 2x
- MakerBot Replicator 5th Gen
- MakerBot Replicator Mini
- MakerBot Replicator z18
- CraftBot 2
- CraftBot PLUS
- BQ Witbox
- BQ Prusa I3 Hephestos
- Creality CR-10
- Creality CR-10s
- Creality Ender
- CTC
- Anet
- Anycubic
- Geetech
The MK8 Nozzle is considered the successor of the MK7 and tries to make up for the disadvantage of the MK7 with more material. The more solid construction, based on the first Ultimaker nozzles, creates a heat cushion in the nozzle, so to speak, that the print material does not cool down too early. As with most nozzles, it is a matter of faith which design suits you better.
Advanc3D premium nozzles are a series of high quality replacement nozzles that will give you a noticeable difference when printing. A high quality nozzle is like a sharpened pencil - simply indispensable for perfect results!
All Advanc3D nozzles are made of brass CuZn37, steel X 8 CrNiS 18-9 or titanium Ti-5Al-2.5Sn of the highest quality and using the most advanced technology. All nozzles are manufactured with a tolerance below ± 0.01 mm. This results in a very smooth and uniform extrusion, which is of course noticeable in the print quality!
For best results we recommend to re-level your print bed after each nozzle change. Our nozzles are also compatible with other 3D printers, but may have a different height.
Advanc3D nozzles are the perfect choice for enthusiasts who want to get more out of their 3D printer!
Features:
Type : MK8
Material: Brass CuZn37
Filament diameter: 0.3mm
Filament diameter: 1.75mm
Nozzle type: Direct
Tube length: 13mm
Flare width: 8mm
Lens thread: M6
Cannelure thread length: 4.9mm
Suitability: Not suitable for abrasive materials
Feature: High accuracy
Compatible with:
- MakerBot
- Replicator 1
- MakerBot Replicator 2
- MakerBot Replicator 2x
- MakerBot Replicator 5th Gen
- MakerBot Replicator Mini
- MakerBot Replicator z18
- CraftBot 2
- CraftBot PLUS
- BQ Witbox
- BQ Prusa I3 Hephestos
- Creality CR-10
- Creality CR-10s
- Creality Ender
- CTC
- Anet
- Anycubic
- Geetech
Reviews
There are no reviews yet.
