None
Items 1 - 40 of 66
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6*21mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and the thermal conductivity is not optimally matched to your printing process.
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6 M7*22mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer ensures optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
V6 style teflon nozzle for 3D printer, type - V6 style, coating - non-stick, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, shaft width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M7, cold end side - 6.9mm.
In stock
The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 7mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 18mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Nozzle for 3D printer, type - Ultimaker Original, material - stainless steel X 8 CrNiS 18-9, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 15.8mm, keyway width - 10mm, nozzle thread - M6, nozzle thread length - 5.8mm
In stock
Die and heating block for 1.75mm filament. The diameter is 0.4 mm.
In stock
Nozzle for Ideaformer IR3 3D printer, type - IR3, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 15mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 7mm
In stock
Material: Copper coated - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
Material: Coated brass - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
MK8 Teflon Nozzle made of brass CuZn37 for 1.75mm filament nozzle for 3D printer, type - MK8, coating - non-stick, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
Items 1 - 40 of 66