None
Items 61 - 90 of 214
In stock
Inner diameter 12 mm, outer diameter 21 mm, length 57 mm, flange: 32 x 32 mm, quiet running, LMK12LUU
Top rated
Inner diameter 6 mm, outer diameter 12 mm, length 30 mm, quiet running, LM6LUU
In stock
- MK9 Hot End Heater Block for 3mm Thermal Sensor
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
In stock
- 12V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Ribbon cable : AWG28 RM1,27 8pin - Post sockets: 8pin, RM2,54 - Length : 60cm
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Nozzle for 3D printer, type - AiO, material - brass CuZn37, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 35.6mm, key width - 8mm, nozzle thread - M6/M6, nozzle thread length - 15mm
In stock
- Outer diameter 9 mm
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Height: 6mm - Width: 10mm - Hole: 5mm
In stock
CR-10 aluminum extruder, Adjustable spring tension, Integrated filament guide, Suitable for Nema 17 motors, Optimized for Bowden setup, Feeder wheel included, M6 thread for PushFit or Throat available, Red anodized
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
RepRap compatible limit switch with connection cable. Perfectly suited as door contact, limit or reference switch for robots, 3D printers or CNC / self-build machines.
In stock
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 3mm axles or M3 screws. Features:
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
- Length 52 mm
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Polyimide tape, 20mm wide, approx. 33m long. Temperature resistance: approx. 260 ° C. Well suited for insulation of heating blocks in 3D printers.
In stock
The Advanc3D ESD-15 tweezers with their 45° bent tip is a must-have for every 3D printing enthusiast. It combines precise handling with effective electrostatic discharge (ESD) protection.
In stock
This sturdy corner angle made of steel connects three aluminum profiles at the same time at a right angle to each other. The aluminum profiles should have a cross-section of 20 mm x 20 mm and a groove opening of 6 mm.
In stock
Material: Coated brass - Diameter: 0.4mm - Filament diameter: 1.75mm - Type of lens: Direct - Length: 12.6mm - Width: 7mm - Thread: M6 - Length of thread: 7.6mm -
In stock
Carriage Y left, length 83mm, width 18mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
Slide Y right, length 83mm, width 42mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
- Ball bearing mounted arm
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
Items 61 - 90 of 214