China
Items 41 - 80 of 214
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 7mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 18mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
Material: Stainless steel 1.4301 / 1.4305 - Profile size: 20 - Groove width in mm: 6 - >Profile compatibility: TypeB - Thread: M5
In stock
Material: Stainless steel 1.4301 / 1.4305 - />Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M4
In stock
Material: Stainless steel 1.4301 / 1.4305 - Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M3
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
Nozzle for 3D printer, type - Ultimaker 2+, material - steel, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, nozzle diameter - 7mm, nozzle thread - M6, nozzle thread length - 5mm
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
Slide Y right, length 83mm, width 42mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
In stock
Carriage Y left, length 83mm, width 18mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
In stock
Plastic carriage for X axis for Makerbot, CTC or Flashforge printers.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Material: Aluminum, Length: 25mm, Outer diameter: 14mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
In stock
Ribbon cable : AWG28 RM1,27 8pin - Post sockets: 8pin, RM2,54 - Length : 60cm
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
Best sellers
PushFit, 6mm tube connector, plastic, for Ultimaker
Items 41 - 80 of 214