China
Items 1 - 30 of 76
In stock
Throat Neck Screw CR10 Titanium Copper Neck Screw Throat M6*27.5mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer ensures optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and the thermal conductivity is not optimally matched to your printing process.
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6 M7*22mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer ensures optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
Throat Neck Screw V6 Titanium Copper Neck Screw Throat M6*21mm 1.75mm Filament Heel Solid Metal The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and the thermal conductivity is not optimally matched to your printing process.
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
In stock
This VolcanoV2 heater block allows you to use the high temperature PT100 sensors with high accuracy on your Volcano, making it compatible with the PT100 upgrade kit on your V6 hot end.
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
In stock
- 12V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Fusing platform and air guide for Flashforge Creator Pro and similar printers such as MakerBot Replicator 2x
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
Heating block for Makerbot extruder suitable for copper insert
In stock
Bowden coupling, 6mm hose connection, cannulated, aluminum, operating pressure -0.95 to 6 bar
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 18mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
Items 1 - 30 of 76