Advanc3D
Items 181 - 210 of 213
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
- 16 or 20 teeth (16T 20T) - inner diameter 5mm or 8mm - outer diameter 13mm, 16mm or 18mm - belt width 6mm or 10mm for double pulley
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
Timing belt clamp for GT2 belts up to 9mm width
In stock
This 500cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
In stock
Single row ball bearings with deep raceway grooves - Narrow osculation between raceway grooves and balls - Radial and axial loads in both directions, even at high speeds
In stock
Height: 6mm - Width: 10mm - Hole: 5mm
In stock
Height: 6mm - Hole: 5mm - Adjustment width: 0.1-0.5mm - Material: Stainless steel
In stock
Ribbon cable : AWG28 RM1,27 8pin - Post sockets: 8pin, RM2,54 - Length : 60cm
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
M3 knurled nut for easy mounting and leveling of heating beds and printing plates. Suitable for Ultimaker Original, Ultimaker 2, Ultimaker 2+ and the corresponding Extended versions. Height: 12mm, head diameter: 15mm
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
In stock
Current: 5A
Voltage: 250V
Voltage: 250V
Best sellers
This 100cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 150cm long cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 20cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
In stock
Material: Stainless steel 1.4301 / 1.4305 - Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M3
In stock
Material: Stainless steel 1.4301 / 1.4305 - />Profile size: 20 - Groove width in mm: 6 - Profile compatibility: TypeB - Thread: M4
In stock
Material: Stainless steel 1.4301 / 1.4305 - Profile size: 20 - Groove width in mm: 6 - >Profile compatibility: TypeB - Thread: M5
Best sellers
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Items 181 - 210 of 213