Advanc3D
Items 151 - 200 of 213
In stock
- Filament diameter 1.75 mm.
- Made of hardened steel.
- Suitable for thing:3016298.
- Suitable for Prusa i3 MK3
- Made of hardened steel.
- Suitable for thing:3016298.
- Suitable for Prusa i3 MK3
In stock
This 500cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
In stock
Removes ABS and PLA residues and supports from printed 3D objects
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
In stock
Removes ABS and PLA residues and supports from printed 3D objects
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Nozzle for 3D printer, type - Ultimaker 2+, material - steel, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, nozzle diameter - 7mm, nozzle thread - M6, nozzle thread length - 5mm
Slide Y right, length 83mm, width 42mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
In stock
Carriage Y left, length 83mm, width 18mm, height 62mm, For 8mm shafts, weight oriented manufacturing.
Plastic arm (stiffener, struts) for Makerbot, CTC, Wanhao, FlashForge and other similar 3D printers. We have already successfully installed this spare part on the printers mentioned below. The arms of the Z-axis are made of ABS and should be replaced over time.
In stock
The Advanc3D Extruder Block is specifically designed for the Makerbot Single Extruder MK8 Half Size CTC and offers outstanding performance and precise fit for your 3D printing system.
In stock
The Advanc3D extruder single block is specifically designed for use with A8 or similar i3 direct extruders and offers outstanding performance and compatibility.
In stock
Extruder suitable for Ultimaker 2, 50 x 47 mm, mounting screws distance 26mm, Feeder wheel included, suitable for 1.75mm filament, left side
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
- Spring loaded - Integrated filament guide - Fits Nema 17 motors - Feeder wheel included - Semi-high design for replicator clones - Plastic
In stock
The Advanc3D ESD-15 tweezers with their 45° bent tip is a must-have for every 3D printing enthusiast. It combines precise handling with effective electrostatic discharge (ESD) protection.
In stock
The Advanc3D ESD-10 tweezers are an indispensable tool for every 3D printing enthusiast. It offers precise handling and additional electrostatic discharge (ESD) protection.
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
The Advanc3D Filament Pliers is an essential tool for any 3D printing enthusiast. It offers excellent precision and comfort to help you handle your 3D printing material.
In stock
PTFE - 1.75mm - Natural - Operating temperature: 250°C - Max. temperature: 300°C - Melting point: 330°C - For Ultimaker 2, Ultimaker 2+, Extended
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
In stock
Feeder wheel for 1.75-3mm filament suitable for Ultimaker for feeding 1.75 mm and 3 mm filament in 3D printers.
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 38 teeth. Extruder drive gear with 38 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
Heating block for Makerbot extruder suitable for copper insert
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M6
Items 151 - 200 of 213