Advanc3D
Items 1 - 30 of 213
Best sellers
This 20cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 150cm long cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
This 100cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
Best sellers
Material: Aluminum, Length: 25mm, Outer diameter: 18mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Best sellers
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, graphite inserts, self-lubricating, replacement for LM8UU, maintenance-free
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
This silicone dampener for the heating bed of 3D printers increases the stability, making bed leveling hardly necessary.
In stock
- 24V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Single row ball bearings with deep raceway grooves - Narrow osculation between raceway grooves and balls - Radial and axial loads in both directions, even at high speeds
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 45 mm, flange: 25 x 25 mm, silent running, LMK8LUU
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
Items 1 - 30 of 213