Advanc3D
Items 1 - 50 of 213
In stock
MK8 Teflon Nozzle made of brass CuZn37 for 1.75mm filament nozzle for 3D printer, type - MK8, coating - non-stick, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
In stock
Nozzle for Ideaformer IR3 3D printer, type - IR3, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 15mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 7mm
In stock
- 16 or 20 teeth (16T 20T) - inner diameter 5mm or 8mm - outer diameter 13mm, 16mm or 18mm - belt width 6mm or 10mm for double pulley
In stock
V6 style teflon nozzle for 3D printer, type - V6 style, coating - non-stick, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, shaft width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
Top
MK7 nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
DaVolcano Nozzle for 3D printer, type - DaVolcano, nozzle type - Direct, nozzle length - 21mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 16mm
In stock
Nozzle for 3D printer, type - AiO, material - brass CuZn37, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 35.6mm, key width - 8mm, nozzle thread - M6/M6, nozzle thread length - 15mm
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M7, cold end side - 6.9mm.
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
- MK9 Hot End Heater Block for 3mm Thermal Sensor
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 36 teeth
- 2x M3 grub screw
In stock
- Outer diameter 9 mm
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- Concave teeth
- M3 grub screw
In stock
- Length 62 mm
- Width 43 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
- Width 43 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
- Length 52 mm
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
- Width 52 mm
- Height 15 mm
- Solid processing
- Feeder wheel included
In stock
A small carbon steel filament drive with really sharp teeth. They are carefully manufactured on a synchronized CNC process that gives a sharp, even and cleanly cut tooth profile with incredibly good grip.
In stock
Inner diameter 8 mm, outer diameter 15 mm, length 25 mm, graphite inserts, self-lubricating, replacement for LM8UU, maintenance-free
Top rated
- Ideal for ABS, PLA, HIPS, PETG, Brick, Wood & Flexible
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 220x220 mm
- Easy to attach to print bed with M3 adhesive film
- Heat resistant, robust and durable
- with optimal care film lasts several months
- 220x220 mm
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
In stock
Vibration dampers for Nema17 stepper motors. Two steel mounts with vibration damping rubber layer. Virtually torsion free with no loss of damping. Torsionally stiff
In stock
Polyimide tape, 20mm wide, approx. 33m long. Temperature resistance: approx. 260 ° C. Well suited for insulation of heating blocks in 3D printers.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
This steel sliding block is designed for aluminum profiles with a groove opening of 6 mm.
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
DaFlexpad system consisting of Flexpad and magnetic foil with peel-off tab. Magnetic foil easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Nozzle for 3D printer, type - Ultimaker Original, material - stainless steel X 8 CrNiS 18-9, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 15.8mm, keyway width - 10mm, nozzle thread - M6, nozzle thread length - 5.8mm
In stock
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 3mm axles or M3 screws. Features:
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
⢠Aluminum
⢠Toothless
⢠3mm axle diameter
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Shaft holder for linear guides made of die-cast aluminum. Version for 8mm shafts.
Items 1 - 50 of 213