not applicable
Items 121 - 140 of 213
In stock
Including heating block and nozzle, thermistor NTC 3900k and 50V 12V heating cartridge thread M6, nozzle diameter 0.4 mm, filament suitability 1.75 mm
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
In stock
Dimensions: 220x220, 300x300 or 400x400 depending on the variation - Material: aluminum, insulation material - Thickness: approx. 1cm - Adhesive foil on the back side.
In stock
Height: 84 mm, width: 56 mm, depth: 58 mm, galvanized steel, holes and bushings already present
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
- Ball bearing mounted arm
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
- Adjustable spring tension
- Integrated filament guide
- Suitable for Nema 17 motors
- Can be used as direct or bowden setup
- Feeder wheel included
- M6 thread for PushFit or Throat available
- Colored anodized
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
In stock
- Spring tensioned
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
- Filament guide integrated
- Suitable for Nema 17 motors
- Feeder wheel included
- Semi-high design for replicator clones
- Colored anodized
Top
- compact design
- low weight
- solid construction
- improved filament guide for flexible filament
- Mountable with a standard hole pattern to be compatible for many models.
- Optimized for flexible filaments
- low weight
- solid construction
- improved filament guide for flexible filament
- Mountable with a standard hole pattern to be compatible for many models.
- Optimized for flexible filaments
In stock
- Prevents frequent leveling of the 3D printer. Very high stiffness!
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
In stock
Dualdrive Bowdenextruder - ABS - Black - suitable for 1,75 mm filament - suitable for Wanhao D9, Creality C R-10, Ender-3, Anet E10
Items 121 - 140 of 213