None
Items 1 - 50 of 76
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M7, cold end side - 6.9mm.
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
- MK9 Hot End Heater Block for 3mm Thermal Sensor
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Polyimide tape, 20mm wide, approx. 33m long. Temperature resistance: approx. 260 ° C. Well suited for insulation of heating blocks in 3D printers.
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
Top
- Model Short-Distance J-Head V6 lite Hot End
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 7mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 18mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Heating block for Makerbot extruder suitable for copper insert
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Items 1 - 50 of 76