None
Items 1 - 40 of 76
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M7, cold end side - 6.9mm.
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
- MK9 Hot End Heater Block for 3mm Thermal Sensor
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
In stock
Polyimide tape, 20mm wide, approx. 33m long. Temperature resistance: approx. 260 ° C. Well suited for insulation of heating blocks in 3D printers.
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
In stock
Including heating block and throat (full metal verion). Thread M6, Extra long melt zone, For higher printing speeds and greater outflow, Filament suitability 1.75 mm.
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
In stock
- 12V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Bowden coupling, 6mm hose connection, cannulated, aluminum, operating pressure -0.95 to 6 bar
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
In stock
DaVolcano Hot End Heater Block, Brass version for higher temperatures, Compatible with many printers, Easy to use, Only suitable for DaVulcano Nozzles, Filament diameter depends on Nozzle
In stock
The neck screw of your 3D printer provides the optimal heat dissipation from the heating block into the coldend? If your filament often "jams" in the throat, it may be because the processing and thermal conductivity is not optimally matched to your printing process.
In stock
This VolcanoV2 heater block allows you to use the high temperature PT100 sensors with high accuracy on your Volcano, making it compatible with the PT100 upgrade kit on your V6 hot end.
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
Advanc3D Ultimaker 2 Heat Sink (UM2 Aluminum Heat Sink -351707)
In stock
Advanc3D Cooler UM2 Mounting Bracket for Ultimaker 2
In stock
Advanc3D Heat Sink UM2 Mounting Bracket for Ultimaker 2
In stock
Fusing platform and air guide for Flashforge Creator Pro and similar printers such as MakerBot Replicator 2x
In stock
Including heating block and nozzle, thermistor NTC 3900k and 50V 12V heating cartridge thread M6, nozzle diameter 0.4 mm, filament suitability 1.75 mm
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
In stock
- 20x Nozzle
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
- 2x Heating block V6
- 2x angle wrenches
- 4x silicone sock
- 1x storage box
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
In stock
- Model DaHotend CR-10, Cr-10s, CR-10 S4, CR-10 S5, Ender and similar 3d printers
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
- More compact design
- Improved temperature control and cooling
- Nozzle diameter 0.4 mm
- Filament suitability 1.75 mm
Items 1 - 40 of 76