None
Items 31 - 60 of 213
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 26 teeth. Extruder drive gear with 26 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
In stock
MK7 / MK8 feeder wheel for 1.75-3mm filament 38 teeth. Extruder drive gear with 38 teeth for feeding 1.75 mm and 3 mm filament in 3D printers. Suitable for 5 mm shafts
Top
MK7 nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - Direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
Top
MK8 brass CuZn37 nozzle for 1.75mm filament nozzle for 3D printer, type - MK8, material - brass CuZn37, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, shaft width - 8mm, nozzle thread - M6, nozzle thread length - 4.9mm
In stock
- 16 or 20 teeth (16T 20T) - inner diameter 5mm or 8mm - outer diameter 13mm, 16mm or 18mm - belt width 6mm or 10mm for double pulley
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
In stock
The Advanc3D Spatula is an essential tool for anyone working with 3D printing. It provides a safe and efficient way to remove your finished prints from the printing plate.
In stock
Length: 190mm
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Bristle length: 15mm
Handle material: plastic
Bristle material: brass
Advantages and features of this product:
Sturdy hand wire brush
Studded with crimped brass bristles
Ideal for 3D printer nozzle cleaning
Removes filament residue from the printer nozzle
Bristles are easily shortened with scissors
Total length 190 mm (19cm)
Bristle length 15mm (1,5cm)
In stock
POM (Polyoxymethylene) is a good high molecular weight thermoplastic. POM nuts are used in 3D printers and convince through wear resistance.
In stock
V6 style nozzle for 3D printers, type - V6 style, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13.2mm, key width - 7mm, nozzle thread - M6, nozzle thread length - 7.9mm
In stock
Timing belt clamp for GT2 belts up to 9mm width
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
The Advanc3D Extruder Block is specifically designed for the Makerbot Single Extruder MK8 Half Size CTC and offers outstanding performance and precise fit for your 3D printing system.
In stock
The Advanc3D extruder single block is specifically designed for use with A8 or similar i3 direct extruders and offers outstanding performance and compatibility.
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
Heating block for Makerbot extruder suitable for copper insert
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
Top rated
Inner diameter 6 mm, outer diameter 12 mm, length 30 mm, quiet running, LM6LUU
In stock
The nozzle of your 3D printer is clogged and you can no longer clean it? Just replace the nozzle with one of our new ones.
In stock
RepRap compatible limit switch with connection cable. Perfectly suited as door contact, limit or reference switch for robots, 3D printers or CNC / self-build machines.
In stock
- Outer diameter 11 mm
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
- Inner diameter 5 mm
- Height 11 mm
- 26 teeth
- 2x M3 grub screw
Items 31 - 60 of 213