Advanc3D
Items 1 - 50 of 285
In stock
Remaining filament from overproduction. The filament has no roundness defects. These are partial rolls where the nominal weight was not reached. The weight we quote is the minimum net weight of the roll. They are different types of rolls.
In stock
Energy chains are an essential accessory for 3D printers that help keep cables and hoses safe and organized as the printer's moving components move during printing. They prevent cable breaks, wear and tear, and provide increased durability for the cables and hoses
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
12V 40W cartridge heater for heating 3D printer hot ends. The head of the heating cartridge is made of stainless steel with a ceramic core. Ideal for use in RepRap 3D printers such as the Prusa i3, Mendel and more.
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 12V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
This steel sliding block is designed for aluminum profiles with a groove opening of 6 mm.
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
It is shaped so that it can be inserted at any point of the profile.
No need for cumbersome insertion from the side. A serrated structure ensures that the sliding block is firmly anchored in the aluminum profile when the screw is tightened.
With bar as a guiding aid and rotation stop.
Compatible with Bosch, ITEM and various extrusions profiles 20 x 20 mm groove 6
In stock
Removes ABS and PLA residues and supports from printed 3D objects
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
In stock
Removes ABS and PLA residues and supports from printed 3D objects
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
In stock
Removes ABS and PLA residues and supports from printed 3D objects
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
- Various tweezers
- Screwdriver and open-end wrench
- Filament pliers and nozzle cleaner
- Hexagonal angle pliers, file and mini spirit level
In stock
This 70 cm long Dupont cable is ideal for connecting sensors, modules or similar. over a longer distance
In stock
24V 40W cartridge heater for heating 3D printer hot ends. The head of the heating cartridge is made of stainless steel with a ceramic core. Ideal for use in RepRap 3D printers such as the Prusa i3, Mendel and more.
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 50W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
Best sellers
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
In stock
This 70 cm long Dupont cable is ideal for connecting sensors, modules or similar. over a longer distance
In stock
A small carbon steel filament drive with really sharp teeth. They are carefully manufactured on a synchronized CNC process that gives a sharp, even and cleanly cut tooth profile with incredibly good grip.
Best sellers
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
In stock
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
In stock
This 70 cm long Dupont cable is ideal for connecting sensors, modules or similar. over a longer distance
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Retaining clips for the backward locking of the glass plate with a clamping range of 5mm on the Ultimaker Original. Ultimaker Original Plus, Ultimaker 2, Ultimaker 2+, Ultimaker 2 extended, Ultimaker 3, Ultimaker S5 and many more printers.
In stock
Fusing platform and air guide for Flashforge Creator Pro and similar printers such as MakerBot Replicator 2x
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Made of high quality carbon steel for long life and better performance. For convenient connection of aluminum profiles and attachments.
In stock
Single row ball bearings with deep raceway grooves - Narrow osculation between raceway grooves and balls - Radial and axial loads in both directions, even at high speeds
In stock
This corner bracket made of high quality aluminum alloy are durable and solid. Often used to reinforce right-angled corner joints of 2020 aluminum profile constructions.
In stock
Nozzle for 3D printer, type - AiO, material - brass CuZn37, nozzle diameter - 0.4mm, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 35.6mm, key width - 8mm, nozzle thread - M6/M6, nozzle thread length - 15mm
In stock
Height: 6mm - Width: 10mm - Hole: 5mm
In stock
High quality aluminum effector for mounting J-Head V6 hotends in a Kossel or Delta 3D printer.
In stock
Shaft holder for linear guides made of die-cast aluminum. Version for 10mm shafts.
In stock
Shaft holder for linear guides made of die-cast aluminum. Version for 12mm shafts.
In stock
Shaft holder for linear guides made of die-cast aluminum. Version for 8mm shafts.
In stock
These rubber tires are designed to decouple the Bambu Lab P1P from other 3D printers on the same surface by absorbing vibration energy, helping to minimize machine wear caused by vibration.
In stock
Silicone damper for heating bed - Height: 18 mm
This silicone damper for the heating bed of 3D printers increases stability, making bed leveling hardly necessary.
The existing springs are simply replaced by the silicone buffers.
Scope of delivery:
3 x silicone buffers 18mm length
1 x silicone buffer 16mm length
In stock
Polyimide tape, 20mm wide, approx. 33m long. Temperature resistance: approx. 260 ° C. Well suited for insulation of heating blocks in 3D printers.
In stock
The ceramic heater can heat the nozzle up to 300 °C, which is only intended for use with the complete Bambu Lab hotend assembly.
In stock
Chromium nozzle for 3D printers, type - MK7, filament diameter - 1.75mm, nozzle type - direct, nozzle length - 13mm, key width - 6mm, nozzle thread - M6, nozzle thread length - 4.8mm
In stock
CR-10 aluminum extruder, Adjustable spring tension, Integrated filament guide, Suitable for Nema 17 motors, Optimized for Bowden setup, Feeder wheel included, M6 thread for PushFit or Throat available, Red anodized
Items 1 - 50 of 285