not applicable
Items 1 - 50 of 76
Best sellers
Straight screw-in connectors 4mm Bowden Tubes for clipping to the hotend. The plastic PushFit connectors of the brand Advanc3D are optimized for the application in 3D printing.
In stock
PushFit, 6mm tube connector, plastic, for Ultimaker
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
PushFit, R1/8 thread, 4mm hose connection, cannulated, brass, working pressure -0,95 to 6 bar, for Hotends
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
In stock
- 12V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
- 24V voltage
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
- Power 40W
- Ceramic core
- Diameter 6mm
- Length 20mm
- Cable length about 1m
In stock
Heating block 2nd generation â Optimized for Makerbot extruder & copper insert
In stock
Model DaVulcan Hot End Heater Block - Compatible with many printers - Easy to use - Only suitable for Vulcan Nozzle - Filament diameter depends on Nozzle
In stock
Heating block for Makerbot extruder suitable for copper insert
In stock
- DBr style heating block with double-sided holder for thermocouples
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Compatible with many printers
- Simple design
- Many nozzle compatible
In stock
- MK9 Hot End Heater Block for 3mm Thermal Sensor
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
- Compatible with many printers
- Simple design
- Many nozzle compatible
- Filament diameter depends on Nozzle
In stock
Bowden coupling, 6mm hose connection, cannulated, aluminum, operating pressure -0.95 to 6 bar
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
In stock
- Diameter 3 mm - Installation length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - With XH2.54 connection
In stock
Diameter 2-3 mm - Insertion length approx. 15 mm - Type NTC 3950 100k - Cable length approx. 100 cm - Dupont connector
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 18mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printers, material - brass CuZn37, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - without heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - titanium Ti-5Al-2.5Sn, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 6.9mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 20mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - 7mm.
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 23mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 26mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 30mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 40mm, heel - with heel, heater block side - M6, cold end side - M6
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
In stock
Throat for 3D printer, material - stainless steel X 8 CrNiS 18-9, filament diameter - 1.75mm, length - 22mm, heel - with heel, heater block side - M6, cold end side - M7
Items 1 - 50 of 76