Advanc3D
Items 1 - 26 of 26
Best sellers
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
Best sellers
The Teflon tube as filament feed to the extruder of the 3D printer has proven itself here. Due to the low resistance and the improved guidance, a better printing result can be achieved.
Best sellers
The Filament Connector 1.75mm in black aluminum allows seamless connections between your filaments. It is durable, reliable and perfect for your 3D printing needs.
Best sellers
Material: Aluminum, Length: 25mm, Outer diameter: 18mm, Input shaft diameter: 5mm, Output shaft diameter: 8mm, Weight: 16g
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
Amperage: 3A-5A
Voltage: 125V-250V
Voltage: 125V-250V
Best sellers
These socks keep your nozzle clean and do not burn on shrunken plastic. They not only keep the nozzle clean, but also keep the heat in the hot end and away from the print.
Best sellers
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 3mm axles or M3 screws.
Best sellers
Idler idlers for 6mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 5mm axles or M5 screws.
Best sellers
Advanc3D Tensioner pulley for 5mm axles for 10mm belts - GT2 Pulley with ball bearing for 3D printer
Idler idlers for 10mm wide GT2 timing belts. With ball bearings for quiet and vibration-free operation. Suitable for 5mm axles or M5 screws.
Best sellers
The LM8UU linear ball bearing is an essential accessory for any 3D printer, allowing precise and smooth movement of the moving components. These linear bearings are specifically designed for the 8mm linear shaft and offer optimal performance with minimal maintenance.
Best sellers
This 70 cm long Dupont cable is ideal for connecting sensors, modules or similar. over a longer distance
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
cured nozzle for interchangeable nozzles Hotend suitable for P1P / X1C
Best sellers
MK10 Nozzle for 1.75mm filament Nozzle for 3D printer, type - MK10, filament diameter - 1.75mm, nozzle type - Bowden, nozzle length - 13.2mm, shaft width - 9mm, nozzle thread - M7, nozzle thread length - 4.3mm
Best sellers
This 100cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 10cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 150cm long cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
This 20cm cable is perfect for connecting stepper motors in 3D printers, CNC mills and robots. The cable has a 6pin JST PH2.0 and a 4pin JST XH2.54 connector.
Best sellers
PushFit, M6 thread, 4mm hose connection, cannulated, steel, operating pressure -0.95 to 6 bar, for extruder
Best sellers
PushFit, R1/8 thread, 4mm hose connection, cannulated, steel, operating pressure -0,95 to 6 bar, for Hotends
Best sellers
- Interchangeable sleeves for easy adaptation to different materials and diameters - Maximum operating temperature of up to 300°C for printing high performance materials such as carbon fiber - Chrome-zirconium-copper plating for high temperature resistance and better heat conduction
Best sellers
- Interchangeable sleeves for easy adaptation to different materials and diameters - Maximum operating temperature of up to 300°C for printing high performance materials such as carbon fiber - Chrome-zirconium-copper plating for high temperature resistance and better heat conduction
Best sellers
Model: J-Head Hot End V5 - Nozzle: 0.4 mm - Filament: 1.75 mm - 12V/24V 40W cartridge heater depending on variation - NTC Thermistor 100k - Connector JST-2.54!
Best sellers
The PEO / PEI magnetic spring steel pressure plate is compatible with your BambuLab A1, P1P or X1 Carbon in the size 257x257mm
Best sellers
Das Advanc3D PLA-CF Filament zeichnet sich durch seine hohe Zugfestigkeit und perfekte Passgenauigkeit aus, ideal für anspruchsvolle 3D-Druckprojekte. Mit seiner optimierten Zusammensetzung aus PLA und Carbonfasern bietet es eine verbesserte Druckstabilität und Langlebigkeit.
Items 1 - 26 of 26