Beschreibung
With the Flexpad system you can use the same print bed surface as the Ender 3 pro. Also fits Ender-3, Ender-3 Pro, Ender-3 V2, Ender-5, Ender-5 Pro, Ender-3 S1, Ender-3 S1 Pro, Ender-3 NEO, Ender-3 V2 Neo.
Our system consists of only two parts. A magnetic sheet and a magnetic print bed sheet.
How does it work?
Once the system is attached to your printer, you simply continue printing as usual. You do not have to accept any restrictions. After the print is finished, you can simply detach the print surface from the print bed and release your component by twisting the print bed foil. We generally recommend to let the print bed cool down a bit, so you don't burn your paws! In contrast to some ready-made systems, where neodymium magnets are embedded in the heating plate, here you have an absolutely even magnetic force that holds your Flexpad firmly. The advantage here is clearly in the manufacturing. We do not have to go the detour and glue the Flexpad first on a metal plate but can save this step completely. This also makes the system cheaper for you than comparable models.
Features:
- Set consisting of Flexpad and magnetic foil
- easy to attach
- Works with PLA and PETG
- Heating bed can still be used
- Easy replacement when more printing is needed
- Minor unevenness of the heating bed can be compensated for
Mounting instructions:
1) Thoroughly clean and degrease the heating bed (remove any adhesive film beforehand)
2) Peel off the brown side of the adhesive film and apply it cleanly and free of bubbles
(If you first apply some rinsing solution, you can still slightly readjust the film and work out any bubbles with a squeegee)
3) Heat me up baby! Heat the heating bed to 50° and let the foil dry like this
4) You can now apply the Flexpad and start printing.
NOTE!
When printing PETG, it is mandatory to apply a "sacrificial layer" sacrificial layer. PETG has enormous adhesion forces and can damage many printing surfaces. We recommend applying a sacrificial layer by means of a glue stick before printing. The sacrificial layer does not reduce adhesion, but allows the component to be released without problems after cooling.
| Angebotspaket: | No |
| Herstellergarantie: | None |
| Herstellernummer: | not applicable |
| Herstellungsland und -region: | China |
| Modifizierter Artikel: | No |
| Produktart: | Bettaufnahme |
| Hersteller: | Advanc3D |
| Baugruppe: | Druckbett |
| Marke: | Advanc3D |
| Item weight: | 0,30 kg |
Artikelnummer: 104670
Artikelnummer: 104688
Artikelnummer: 133413
Silicone damper for heating bed - Height: 18 mm
This silicone damper for the heating bed of 3D printers increases stability, making bed leveling hardly necessary.
The existing springs are simply replaced by the silicone buffers.
Scope of delivery:
3 x silicone buffers 18mm length
1 x silicone buffer 16mm length
Artikelnummer: 100444
- Highest quality! Anodized surface: Prevents scratches and oxidizing fingerprints. Deburred edges: This manufacturing step is often omitted by other manufacturers.
- Suitable for Ultimaker 2, 2+ or own designs.
- Stiffness optimized construction 610g from 4mm aluminum alloy.
- High quality workmanship with German quality assurance
Artikelnummer: 125665
DaFlexpad system consisting of magnetic Flexpad and a steel sheet that is glued to the heating bed. Magnetic sheet easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for.
Artikelnummer: 145488
Artikelnummer: 125666
DaFlexpad system, consisting of Flexpad and magnetic foil with peel-off tab. Magnetic foil easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for
Artikelnummer: 107478
Artikelnummer: 107475
