Advanc3D DaVolcano Evolution - DaVolcano High Performance Kit Heater Block + AIO Nozzle 0.4mm

Beschreibung

The nozzle of your 3D printer is clogged and you can no longer clean it?
Just replace the nozzle with one of our new ones. We offer nozzles for 3D printers in different sizes made of stainless steel, brass or titanium.
Change also the diameter. We have nozzles with a diameter of 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm and 0.8mm. Of course, depending on the type of nozzle.

The English company E3D developed this nozzle design. It is very popular and can be used with E3D's own hotends in many printers. Unlike the other designs, the tip of the nozzle is very close to the heating block, which means that the heat in the filament is kept optimal until the actual printing. Inspired by E3D, there are many different suppliers of this type. This variant of the E3D Nozzle is developed for the so-called Volcano heating blocks. Here, the heating cartridge is mounted vertically and the melting zone is thus extended. The long heating zone has the advantage that you can run larger nozzle diameters at higher speeds without having problems with the material feed or a back pressure. These nozzles can ONLY be used with a Volcano heating block.

Features:
Nozzle type: Volcano
Nozzle material: Stainless steel
Nozzle diameter: 0.4mm
Filament suitability: 1.75mm
Cold end thread: M6
Thread length: 16mm
Nozzle length: 21mm
Nozzle suitability: Suitable for abrasive materials.
Nozzle feature: Due to the extra long melt zone, you can feed the material faster than with standard hotends. So you can also print faster. Heating block included.

---