Advanc3D DaFlexpad 2 System 220x220mm flexible permanent printing plate with magnetic film PLA PETG

DaFlexpad system consisting of magnetic Flexpad and a steel sheet that is glued to the heating bed. Magnetic sheet easy to attach. Works with PLA and PETG. Heating bed can still be used. Easy to replace if more printing is needed. Minor unevenness of the heating bed can be compensated for.

Größe 
20,00 €
Final price* , Free shipping (Paketversand)
  • Low stock level
  • Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)
Description
With the DaFlexpad system, you can use the same print bed surface as the Ender 3 pro.

Our system consists of only two parts. A metal plate for the heating bed and a magnetic print bed foil.

How does it work?
Once the system is attached to your printer, you simply continue printing as usual. You do not have to accept any restrictions. After printing is complete, you can simply detach the print surface from the print bed and release your component by twisting the print bed liner. We generally recommend here to let the print bed cool down a bit, so you do not burn your paws! Unlike some ready-made systems, where neodymium magnets are embedded in the heating plate, here you have an absolutely uniform magnetic force that holds your Flexpad firmly. The advantage here is clearly in the manufacturing. We do not have to go the detour and glue the Flexpad first on a metal plate but can save this step completely. This also makes the system cheaper for you than comparable models.

Features:
- Set consisting of Flexpad and magnetic foil
- Easy to attach
- Works with PLA and PETG
- Heating bed can still be used
- Easy replacement when more printing is needed
- Minor unevenness of the heating bed can be compensated for


Installation instructions:
1) Thoroughly clean and degrease the heating bed (remove any adhesive film beforehand)
2) Peel off the brown side of the adhesive film and apply it cleanly and free of bubbles
(If you first apply a bit of caustic solution, you can readjust the film slightly and work out any bubbles with a squeegee)
3) Heat me up baby! Heat the heating bed to 50° and let the film dry
4) You can now apply the Flexpad and start printing.


NOTE!
When printing PETG, it is mandatory to apply a "sacrificial layer" sacrificial layer. PETG has enormous adhesive forces and can damage many printing surfaces. We recommend applying a sacrificial layer before printing using an adhesive stick. The sacrificial layer does not reduce adhesion, but allows the component to be released without problems after cooling.
Offer package: No
Assembly: Druckbett
Manufacturer: Advanc3D
Manufacturer warranty: None
Manufacturer number: not applicable
Country and region of manufacture: China
Brand: Advanc3D
Modified item: No
Product type: Bettaufnahme
Item weight: 0,30 kg
Write the first review for this item and help others make a purchase decision!

There are no reviews yet.